Construction & Trades

How Much Does Lumber Cost? Board Foot Price Guide

Stacks of lumber at a lumber yard priced per board foot

You’re standing in the lumber aisle with a cut list in one hand and your phone in the other. Twelve boards of 2×6, eight feet long, pressure-treated. A sticker says $9.75 each. And the one question nobody on the aisle can answer for you is the simplest one: is that a good price?

Dollars-per-piece tells you almost nothing. Two boards that look alike can hide very different amounts of wood, and the only number that lets you compare them honestly is the price per board foot. Once you can convert any sticker price into a per-board-foot price, you can compare two yards, a big-box store and a local mill, or a rough-sawn stack and a surfaced one, on a single level field. Think of this page as your board foot price calculator: hand it any sticker price and it gives you back the one number that matters.

This page compares lumber prices by board foot.

Here’s the short version before we get into the details:

Total cost = total board feet × price per board foot

Framing lumber runs roughly $0.75 per board foot, pressure-treated $0.90–1.60, cedar $4–8, common hardwoods like oak and maple $6–15, and premium woods like walnut $20 and up. Plywood and sheet goods are the exception. Those are sold by the sheet, not the board foot.

Now let’s work through it properly, with real numbers.

The one-line price formula

Everything on this page hangs on one formula:

Cost = board feet × price per board foot

A board foot is 144 cubic inches of lumber: a board 1 inch thick, 12 inches wide, and 1 foot long. (Need the full formula for getting board feet from a board’s dimensions? Our guide on how to calculate board feet covers it step by step.) Once you know a board’s board-foot count and the price per board foot, multiplication does the rest.

Stacks of lumber at a lumber yard priced per board foot

Here’s the part people miss: lumber yards and home centers usually sell you a piece price (“$4.00 per stud”), while the price that actually matters for comparing deals is the per-board-foot price. Converting one to the other is one division:

Price per board foot = price per piece ÷ board feet in the piece

Worked example: is that $4.00 stud a fair price?

A standard 2×4×8 stud holds 5.33 board feet (formula guide).

At $4.00 a piece: $4.00 ÷ 5.33 = $0.75 per board foot.

As of October 2026, eight-foot studs typically sell for $3.85–4.15 (about $0.72–0.78 per board foot), so $4.00 lands right in the normal range. That’s a fair price, not a steal, and not a rip-off. Without the per-board-foot conversion, you’d never know.

2026 lumber prices by wood type

Prices move with the season, the species, the grade, and your zip code. Treat everything below as a US retail range as of October 2026, not a quote. The structure is what stays stable: softwoods are cheap because they grow fast, hardwoods cost more, and figured or imported wood costs the most.

Wood typeTypical price per board footCommon as
SPF construction lumber (spruce-pine-fir)$2–5Studs, framing, general building
Douglas fir$0.70–1.20Structural beams, porch posts
Pressure-treated pine$0.90–1.60Decks, fences, outdoor projects
Cedar$4–8Fencing, siding, outdoor furniture
Poplar$6–8Painted furniture, trim, drawers
Red/white oak$8–12Flooring, tables, cabinets
Hard maple$9–15Butcher blocks, workbenches, floors
Walnut$20+Fine furniture, heirloom pieces
Cherry, exotics$20+Accent work, specialty projects

A few readings on the table:

  • Studs are the cheapest wood per board foot because softwood is priced on its nominal size (more on that below) and mills produce it in enormous volume. A 2×4×8 at $4.00 works out to roughly $0.75/BF, the floor for construction-grade lumber.
  • Pressure-treated costs a little more than plain framing lumber (figure roughly $6–10 for a 2×4×8, or $0.90–1.60 per board foot) because the treatment process adds cost. Worth it anywhere the wood touches soil or weather.
  • Cedar sits in the middle. It’s naturally rot-resistant without chemicals, which is why fence builders love it even at $4–8 per board foot.
  • Hardwoods jump fast. Oak at $8–12 and walnut at $20+ are why furniture projects cost what they cost, and why getting your board-foot math right before you buy matters so much more for a tabletop than for a garden bed.

One more comparison worth knowing: rough-sawn lumber (boards straight off the saw, with a coarse surface) typically runs 30–45% cheaper per board foot than the same species surfaced on all four sides (S4S). If you have a planer or don’t mind a rustic look, that’s the single biggest discount in the lumber world.

Worked example 1: pricing a pressure-treated deck

Say your deck design needs 40 boards of 2×8×8, pressure-treated. The yard quotes $1.10 per board foot. What should the lumber cost?

  • Each board: 10.67 board feet (formula guide).
  • Total: 40 × 10.67 = 426.7 board feet
  • Cost: 426.7 × $1.10 = $469.37

Decking means cutting, and cutting means waste: offcuts at the ends, a board with a bad knot you reject. Add 10% for a straightforward deck:

  • With waste: $469.37 × 1.10 = $516.26

So budget about $516 for the decking lumber. If a contractor quotes you $800 for the same wood, you now know the markup lives somewhere in that $284 gap.

Worked example 2: an oak tabletop

You need 26 board feet of 4/4 (one-inch) red oak for a tabletop, priced at $8 per board foot. But this is furniture stock: you’re working around knots, matching grain, and cutting pieces to length. Furniture-grade work wastes more, so plan on 20% waste:

  • With waste: 26 × 1.20 = 31.2 board feet
  • You can’t buy 0.2 of a board foot, so round up: buy 32 board feet
  • Cost: 32 × $8 = $256

This is where the waste rule earns its keep. Skip it and you’d order 26 board feet, run short mid-glue-up, and drive back to the yard, where the next batch might not match your grain. Always round boards up, never down.

Hardwood boards priced by the board foot for a furniture project

Worked example 3: comparing two yards (the real reason per-BF pricing exists)

You need 2×6×10 boards. Each holds 10 board feet (formula guide).

  • Yard A: $8.50 per board → $8.50 ÷ 10 = $0.85 per board foot
  • Yard B: $9.75 per board → $9.75 ÷ 10 = $0.98 per board foot

Yard A wins, and the per-piece prices alone couldn’t tell you that cleanly. $8.50 vs $9.75 looks close, but per board foot the gap is 15%. For a whole project, that’s the difference between on-budget and over. Per-board-foot is the only fair way to compare two quotes.

The plywood exception: priced by the sheet

One thing the board-foot formula can’t do: sheet goods. A 4×8 sheet of 3/4″ CDX plywood ($30–80 a sheet in most regions, commonly $40–55) is priced per sheet, full stop. Don’t try to force it into the board-foot formula; the math won’t match how anyone sells it.

For sheets, the honest formula is even simpler: price = number of sheets × price per sheet, and compare brands the same way: same thickness, same grade, per sheet. The per-board-foot world belongs to solid lumber.

Quick reference: board feet per linear foot

For standard framing sizes, you can skip the full formula and multiply your linear feet by these (from the board foot calculator):

SizeBoard feet per linear foot
2×40.667
2×61.0
2×81.333
2×101.667
2×122.0
4×41.333

Need twenty linear feet of 2×8? That’s 20 × 1.333 = 26.7 board feet. Multiply by your per-board-foot price and you have the cost in about five seconds, which is handy when you’re standing in the aisle doing mental math against a cut list.

The nominal-vs-actual pricing trap

Here’s the quirk that confuses almost everyone once: a “2×4” is not 2 inches by 4 inches. That’s the nominal size, the rough-cut size before drying and surfacing. The actual piece you carry home measures about 1.5 × 3.5 inches.

What does that mean for price? A nominal 2×4×8 contains 5.33 board feet on paper, and softwood lumber is priced on that nominal number. The actual wood in your hands is only about 3.5 board feet if you measure what you got. You’re not being cheated; the whole industry prices softwood on nominal sizes, so framing lumber looks cheap per board foot partly because of this convention. Our nominal vs. actual lumber sizes chart lays out the full size table if you want the details.

Hardwoods work a little differently: they’re sold in quarters, where 4/4 means roughly 1 inch thick, 5/4 means 1.25 inches, and 8/4 means 2 inches. When a hardwood dealer quotes you $8 per board foot for 4/4 oak, the quarter system is already baked into the board-foot count, so you just multiply.

How much extra to buy: the waste factor

Wood is a natural material. Boards have knots, checks, and warp; cuts leave offcuts; glue-ups demand grain matching. Pros buy more than the cut list says, and so should you:

  • Framing and carpentry: add 10–15%
  • Furniture and fine woodworking: add 15–30%

The formula: board feet to buy = required board feet × (1 + waste % ÷ 100), then round the board count up. The waste factor is the cheapest insurance in woodworking: a $20 buffer of extra oak beats a second trip to the yard every time.

3 ways to pay less for the same wood

  1. Always compare per board foot, never per piece. As the two-yards example showed, a 15% price gap hides inside piece prices that look nearly identical. Make every quote speak the same language before you choose.
  2. Buy rough-sawn when you can finish it yourself. At 30–45% less per board foot than surfaced stock, rough-sawn is the biggest legitimate discount going, provided you (or a friend with a planer) can surface it. Even hiring a mill to surface it often leaves you ahead.
  3. Buy long, cut short. Longer boards are often cheaper per board foot than short ones, and one long board can yield two project pieces with the offcut covering waste. Check the per-BF price on the 12-footers before you grab the 8-footers.

Common mistakes

  • Comparing piece prices instead of per-board-foot prices. $9.75 vs $8.50 per board sounds close; $0.98 vs $0.85 per board foot is not. Always convert first.
  • Forgetting waste. Ordering exactly the cut-list quantity is how projects stall. Add 10–15% for framing, 15–30% for furniture, then round up.
  • Pricing plywood by the board foot. Sheets are sold by the sheet. The BF formula is for solid lumber.
  • Confusing nominal and actual sizes — the yard prices softwood on nominal board feet (formula guide).
  • Ignoring grade. Two oak boards at the same per-BF price aren’t the same deal if one is #1 common (more knots) and the other is FAS (clear). Price per board foot only compares fairly within the same grade.

Frequently asked questions

How much does a 2×4 cost per board foot?

An 8-foot 2×4 stud at $3.85–4.15 contains 5.33 board feet, which works out to roughly $0.72–0.78 per board foot, the cheapest common lumber price in the store. Longer or treated 2×4s price a little higher.

How do I calculate the cost of lumber for a project?

Multiply each board’s board feet by the price per board foot, add up all the boards, then add a waste factor (10–15% for framing, 15–30% for furniture). That’s it: cost = total board feet × price per board foot × (1 + waste).

Why is hardwood so much more expensive than pine?

Three reasons: it grows far more slowly, yields less clear lumber per log, and demand from furniture and flooring makers is strong. That’s why pine framing runs under $1 per board foot while walnut starts around $20.

Is it cheaper to buy lumber rough-sawn?

Usually, yes: 30–45% cheaper per board foot than the same species surfaced (S4S). The catch is you need to plane and joint it yourself, or pay someone to. For woodworkers with the tools, it’s the best deal in the yard.

Should I buy lumber at a big-box store or a lumber yard?

Big-box stores win on convenience and standard framing sizes; real lumber yards usually win on hardwood selection, grade options, and per-board-foot price for larger quantities. Compare both in per-board-foot terms. That’s the only comparison that counts.

How much does plywood cost compared to solid lumber?

You can’t compare them per board foot: plywood is priced per sheet (a 4×8 of 3/4″ CDX runs about $40–55 in most regions). Compare sheets to sheets: same thickness, same grade, lowest per-sheet price.

Prices shown are illustrative US retail ranges as of October 2026 and vary by region, grade, and store. This guide is for general education, not a price quote. Check your local yard for current pricing.

Try the calculators

Related guides